Start-Kit TK71
SBC / Carrier board features:
- High-performance single-issue CPU
- 1.0 Ghz - 1.2 Ghz operating speed
- 16KB-Instruction and 16KB-Data 4-way, set-associative L1 cache
- 256KB unified 4-way, set-associative L2 cache
- 16-bit DDR2 memory interface (up to 800 MHz data rate)
- Two Gigabit Ethernet MACs with interface options
- Precise Timing Protocol and Audio Video Bridging
- Single PCI-Express port
- Single USB 2.0 port with integrated PHY
- Two SATA 2.0 ports with integrated PHYs
-
|
|
Start-Kit IV
Development Kit for Marvell's PXA320 (Monohans) runs Windows CE and Linux.
- Includes the TRITON-320 (T320) PXA320 module
- Optional 7" TFT display
- Includes schematics for motherboard at no cost
The TRITON Starter-Kit IV is a ready to use development system for building applications based on the TRITON 320 embedded processor board.
Software:
Besides the pre-installed RedBoot™ firmware, there is a Linux™ kernel installed, which supports all components of the Starter-Kit. Thus, the module can be integrated into existing platforms very fast and applications can be setup without basic work for the board. For enhancements of the Linux™ kernel, it is possible to modify, compile and install the complete Linux™ or parts of it.
In addition to Linux a Windows Embedded CE 6.0 BSP will be on CD
SBC / Carrier board features:
- SODIMM 200 TRITON 320 socket
- Compact Flash type II socket, selectable true-IDE or CF mode
- SD/MMC-card socket
- 3x RS232 on 10pin flat cable headers
- USB-Device connector
- USB-Host connector
- D-SUB 15 VGA connector
- UCB1400 audio codec & touchscreen controller
- 2x 3.5mm audio connectors (stereo line in, headphone)
- JTAG interface
- All pins of the TRITON socket are connected to flat cable headers
- daughter board slot for easy application design-in
- 10/100 Mbit/s Ethernet (DM9000)
- Operating Voltage Range: 6-24VDC
- Transient protected for automotive applications
|
- 100mm x 220mm, overall height 17mm
- Schematics of the base board are included for reference.
Display (option):
- 7" TFT LCD Monitor & Touch Screen
- Screen Size: Diagonal 7" (16:9)
- Physical Resolution: 800 (H) x 480 (V)
- Supported Resolution: 640 x 480 ~ 1600 x 1200
- Display Brightness 300 cd/m²
- Touch Screen Interface: USB port
- Operating Voltage Range: DC 11V ~ 24V, 1A
- Power Supply: DC 12V
- Power Consumption: <8W
- Operating Temperature: -5°C~70°C
- FCC, CE, E13 Certification
- No dead Pixel Guarantee
|
Start-Kit III
Development Kit for Marvell's PXA270 runs Windows CE and Linux.
- Worlds first PXA270 Development Kit
- Includes the TRITON-270 (T270) PXA270 module
- Optional 7" TFT display
- Includes schematics for motherboard at no cost
SBC / Carrier board features:
- SODIMM 200 TRITON socket
- Compact Flash type II socket, selectable true-IDE or CF mode
- SD/MMC-card socket
- 3x RS232 on 10pin flat cable headers
- USB-Device connector
- USB-Host connector
- D-SUB 15 VGA connector
- UCB1400 audio codec & touchscreen controller
- 2x 3.5mm audio connectors (stereo line in, headphone)
- JTAG interface
- All pins of the TRITON socket are connected to flat cable headers
- daughter board slot for easy application design-in
- 10/100 Mbit/s Ethernet (LAN91C111)
- 3,3V single supply design, 5V also available onboard
- Operating Voltage Range: 8-24VDC
|
- Transient protected for automotive applications
- 100mm x 160mm, overall height 17mm
- Schematics of the base board are included for reference.
Display (option):
- 7" TFT LCD Monitor & Touch Screen
- Screen Size: Diagonal 7" (16:9)
- Physical Resolution: 800 (H) x 480 (V)
- Supported Resolution: 640 x 480 ~ 1600 x 1200
- Display Brightness 300 cd/m²
- Touch Screen Interface: USB port
- Operating Voltage Range: DC 11V ~ 24V, 1A
- Power Supply: DC 12V
- Power Consumption: <8W
- Operating Temperature: -5°C~70°C
- FCC, CE, E13 Certification
- No dead Pixel Guarantee
|